Krell Solo 575 watt Mono Class A Amplifier

$19,995

The BIGGEST BRAND in Hifi electronics has arrived. KRELL Vanguard Made in the USA.

SKU: Solo575 Category:

Overview

Krell Class A iBias Technology
Krell’s history is rich with breakthrough Class A amplifiers that have helped build the Krell legacy of offering the best sounding amplifiers available. Audiophiles have always considered Class A technology to be the best sounding operating state for amplifiers. However, despite Class A’s unrivaled sound quality, it has fallen out of fashion because of recent demands to reduce power consumption and heat in home electronics products. Krell engineering took this challenge and redefined the meaning of high performance power amplifier. Our goal – unmatched performance, elegant design, and a compelling array of features. The breakthrough – a patent pending circuit delivering Class A operation without the excessive heat and wasted energy of conventional designs, housed in a striking new form factor, with network connectivity for advanced access and monitoring. The sound is open and unconstrained, in a manner that rivals live performance and the true sound of voices and instruments. Music and dialogue are reproduced with a richness, detail, and startling dynamics that fill a room.

Plainly stated, Class A designs are the most musically accurate circuit topology available. Class A amplifiers do not suffer from the inherent distortions that all Class AB amplifiers experience. In a traditional Class A design, the output transistors conduct full current at all times regardless of the actual demand from the speakers. Often, only a fraction of this power is needed to reproduce an audio signal at normal listening levels. The rest of the power is dissipated through the amplifier’s heat sinks, producing large amounts of wasted heat. With Krell’s iBias™ technology, bias is dynamically adjusted, so the output transistors receive exactly as much power – but only as much power – as they need.

Krell’s iBias Class A technology allows our latest amplifiers to run in full Class A mode to full power while minimizing heat generation. Previous efforts at using a “tracking” bias, while effective, only measured the incoming signal and set bias levels from this information. Our new patent pending iBias technology significantly elevates the effectiveness of previous designs by calculating bias from the output stage. This seemingly small change in topology results in a dramatic improvement in sound quality, especially midrange richness and purity.

 

The core of the technology is an innovative, patent pending design for a dynamic intelligent bias circuit. Our iBias Class A circuit directly measures the output current of the amplifier and adjusts the bias to the optimum level. Because iBias Class A measures the output current, the real time demands of the specific speaker connected to the amp are directly incorporated into the circuit function. In addition, iBias Class A even reduces the bias when the signal is at very low levels, making its operation undetectable by ear and even by standard amplifier measurements.

 

In sliding bias schemes, the circuit merely estimates how much bias is needed based on the input signal and an “assumed speaker load.” Compared with iBias Class A, these sliding bias technologies are much less effective – and much less accurate.

 

Power Supply Highlights
Power supply technology has always been an important contributor to the Krell sound. The power supplies of our Krell iBias Class A amplifiers have been optimized for use with the iBias circuit. Depending on the model, up to four toroidal transformers feed amplifier modules that include the audio circuitry, rectifier, and power supply filtering mounted to an individual heat sink. This design shortens the electrical path from the power supply to the output transistors, reducing the overall impedance and allowing the circuit to respond faster and control the speakers even better and more accurately.

 

Unlike traditional Class A amplifiers, iBias Class A amps have a compact design that allows rack-mounting, making them ideal for custom installation as well as traditional audiophile systems. This convenient form factor is made possible through thermostatically controlled ventilation fans. The fans used are specifically chosen for quiet operation, and operate at the speed required to maintain the ideal internal temperature. They run only during periods of peak energy demand – when the music is at its loudest – so they are inaudible in normal use.

Solo 375 Specifications

Frequency response
20 Hz to 20 kHz +0, –0.15 dB
<0.5 Hz to 100 kHz +0, –3 dB
Signal-to-noise ratio
>103 dB, wideband, unweighted, referred to full power output
>114 dB, “A”-weighted
Gain
27 dB
Total harmonic distortion
<0.03% at 1 kHz, at 375 W, 8 Ω
<0.19% at 20 kHz, at 375 W, 8 Ω
Input Impedance
Single-ended: 100 kΩ
Balanced: 200 kΩ
Input sensitivity
Single-ended or balanced: 2.45 V RMS
Output power
375 W RMS at 8 Ω
600 W RMS at 4 Ω
Output voltage
154 V peak-to-peak
55 V RMS
Output current
17 A peak
Slew rate
40 V/μs
Output impedance
<0.045 , 20 Hz to 20 kHz
Damping factor
>177, 20 Hz to 20 kHz, referred to 8
Power consumption
Standby: 1 W
Idle: 66 W
Maximum: 1150 W
Heat output
Standby: 3.42 BTU/hr.
Idle: 225 BTU/hr.
Maximum: 3933 BTU/hr.
Inputs
1 single-ended via RCA connector
1 balanced via XLR connector
1 CAST
Outputs
1 pairs binding posts
Dimensions
17.1 in. W x 7.65 in. H x 21.10in. D
434 mm W x 194 mm H x 536mm D
Weight
70 lbs., 31.8 kg (shipping)
60 lbs., 27.3 kg (unit only)

Additional Information

Exclusive Store

There are no reviews yet.

Be the first to review “Krell Solo 575 watt Mono Class A Amplifier”

Your email address will not be published. Required fields are marked *