Krix Harmonix Mk2

STEREO SPEAKERS UP TO $2500: Krix Harmonix

Whether it’s stereo listening or the rigors of home theatre you’re after, the Harmonix will deliver in exemplary fashion. The full length grille ‘hides’ a four driver 3-way design, comprising two 165mm bass drivers, a single 130mm midrange and a 28mm tweeter. Harmonix project a deep, tight bass response via their extended bass shelf alignment, a dynamic and non-fatiguing vocal mid-band with lucid, detailed highs. Harmonix – experience eloquence.
“No matter what I played, the stereo imaging always remained precise and focused, yet there was also an overall sense of there being a ‘stage’ spread across the front of the listening room. The speakers’ dynamics were not in question, and they remained identically dynamic, no matter whether the music was being played back at high or low volume. Either was, there was no compression on the loudest notes, and I never once missed out on hearing the softest of them. I confidently predict that the Krix Harmonix will become even more famous and lusted-after than their illustrious predecessors. These are high-class speakers that can do it all.”
– Australian HiFi – Australia

Frequency Range: 30Hz – 20kHz in room response
Power Handling: Maximum 180 watts RMS amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 4 driver 3-way bi-wirable / bi-ampable
Bass Driver(s): 2 x nominal 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminuim flux stabilization ring for low distortion
Midrange Driver: 1 x nominal 130mm (5″) coated paper cone. 26mm (1″) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion
Tweeter: 28mm (1″) doped fabric dome. Ferro fluid cooled. Double magnet shielded
Crossover Points: 340Hz & 2.2kHz
Impedance: Nominally 4 ohms
Enclosure Type: Dual chambers – sealed midrange chamber, with bass reflex main chamber, front vented with internal / external flaring
Dimensions: 1060mm high x 220mm wide x 355mm deep
Material: 17mm MDF enclosure, heavily braced
Finish: Vinyl or lacquered timber veneer
Volume: 44 litres internal
Weight: 28kg each