Krix Epicentrix Mk2 Centre Speaker

Home theatre on a grand scale: this centre channel speaker is designed to truly match the pace of our high energy Neuphonix floorstanding speakers. Like the Neuphonix, multiple 130mm bass drivers deliver punchy, ground-shaking bass energy. A 130mm midrange driver and 26mm tweeter complete the picture, reproducing vocals and sound effects with meticulous precision and depth that will defy the dimensions of your room.  Put yourself at the epicentre of the action.

“With such clarity and tonal balance this centre channel speaker lets you appreciate the acting as well as the action. Voices sound rich and wholesome, spreading deep into the room, while the higher frequencies and female vocals in particular benefit from terrific transparency and purity of tone. The three speakers present a harmonious front, with the Epicentrix providing plenty of width to match the Neuphonix’ punch and presence; no matter what the film, the central image is constantly strong and stable.”

“Beautifully built, the Epicentrix matches the Neuphonix perfectly and is without doubt one of the most articulate and convincing centre channel loudspeakers I’ve ever heard.”

– Audio & Video Lifestyle – Australia

Frequency Range: 40Hz – 40kHz in room response
Power Handling: Maximum 200 watts RMS amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 6 driver 3-way bi-wireable / bi-ampable
Bass Driver(s): 4 x nominal 130mm (5”) coated paper cones. 26mm (1”) voice coil wound on high powered aluminium former provides good linearity and driver control at large cone excursion.
Midrange Driver: 1 x nominal 130mm (5”) coated paper cone. 26mm (1”) voice coil wound on high powered aluminum former, using copper shorting ring and oversized magnet for lower distortion.
Tweeter: 26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion.
Crossover Points: 340Hz & 2.5kHz
Impedance: Nominally 4 ohms
Enclosure Type: Triple chambers – sealed midrange chamber, with dual bass reflex chambers, front vented. *NOTE: The Epicentrix is not magnetically shielded and should not be used in close proximity to CRT televisions*
Dimensions: 225mm high x 900mm wide x 360mm deep
Material: 17mm MDF enclosure, heavily braced, with 25mm MDF front baffle
Finish: Lacquered timber veneer
Volume: 45 litres internal
Weight: 24kg each